Skip to main content
Version: v25.07.31

Azure

This guide provides step-by-step instructions for creating and testing a PE instance on the Azure cloud platform. The process includes setting up the virtual machine, configuring network security and verifying the instance on the hiCLOUDS platform.

Creating PE Instance​

  • Open your web browser and visit the Azure Cloud website.

  • Log in using your credentials.

  • On the Azure Home page, click on the Images section.

    image-1

  • Locate the Azure Images for CE creation and click on the relevant image.

  • Click on the "Create VM" button.

    image-2

  • Fill in the required details for the virtual machine as outlined below:

    • Virtual Machine Name: Enter the desired name for the virtual machine. (i.e: test-pe1)

      image-3

    • Authentication Type: Select Password as the authentication type.

      • Username: Enter the username. (i.e: hiclouds)
      • Password: Provide a secure password.
      • Confirm Password: Re-enter the same password to confirm.

    • Select Inbound Port Rules: Navigate to the inbound port section and select the required ports (i.e: HTTP(80), HTTPS(443), SSH(22))

    • Choose the appropriate license type. (i.e: Other)

    • Click on the Next: Disks button to proceed.

    image-4

  • Click on Next: Networking to configure the network settings.

    image-5

    • NIC Network Security Group: Select Advanced.

    • Configure Network Security Group: Provide the name for the Network Security Group (NSG). (i.e: (new)test-pe1-nsg)

    • Click on the Next: Management button.

      image-6

  • Review the details and then click on the Review + Create button.

    image-7

  • Click on the Create button to deploy the virtual machine.

    image-8

  • The deployment process will begin, and its progress can be monitored on the screen.

    image-9

  • Once the deployment is complete, navigate back to the Home page.

  • Click on Virtual Machines to view the newly created PE instance.

    image-10

Verify the PE Instance​

  • Once the PE is successfully created, proceed to the hiCLOUDS platform to verify its configuration.

  • Go to Login > PE Devices > ALL.

  • Make sure that the newly created PE instance appears in the list of devices.

    image-11

Important Notes for Users​

  • Ensure that the selected Azure image is correct and approved for PE deployment.
  • The username and password should be stored securely and shared only with authorized users.
  • Always enable only the required inbound ports (SSH, HTTP, HTTPS). Avoid opening unnecessary ports.
  • The Network Security Group (NSG) must be configured correctly to allow device communication with the hiCLOUDS platform.
  • If the instance is not visible on hiCLOUDS, verify:
    • Network connectivity
    • Security rules
    • Correct image and deployment settings
  • Avoid stopping or deleting the VM unless it is no longer required.
  • Ensure your Azure subscription has sufficient quota and billing balance.
  • For production deployments, use strong passwords and restricted access policies.
  • Any configuration changes may take a few minutes to reflect.

FAQs​

Q:1 What should I do if the PE instance doesn’t appear on the hiCLOUDS platform?

Ensure the instance is properly configured and the network settings align with the hiCLOUDS requirements.